Our Projects

Low-strain integrity tests on sixty production piles with rapid screening and flagged re-tests.

Continuous thermal profiling on twelve 1.8 m piles to detect necks, inclusions, and cold joints during curing.

CSL testing on eighteen 1.5 m piles with 3D tomography to verify concrete integrity below tidal zone.

200% design load maintained compression test with full instrumentation and deflection monitoring.

PDA testing on twenty-four production piles with CAPWAP analysis to verify capacity and driving criteria.

Ground magnetic survey across 48 km² with 50 m line spacing to support mineral exploration targeting.

Sixteen refraction spreads along a 22 km preliminary alignment to inform cut-fill balance and blasting assumptions.

Grid-based GPR acquisition across 1.8 km of carriageway and verge to reduce clash risk during excavation.

Forty-two vertical electrical soundings along a 18 km alignment to support trench design and grounding assessments.

2D/3D ERT programme across a 4.2 km corridor to map resistivity contrasts and identify potential groundwater-bearing zones.